
Licensed since 2007. Litmec Electrical handles the larger electrical jobs in Malvern — full rewires, switchboard upgrades and renovation fit-outs on Victorian, Edwardian and interwar homes.
Malvern is period housing of the more substantial kind — Victorian terraces and freestanding homes, Edwardian villas, solid interwar brick through to Malvern East. Much of it has been renovated at least once, and that is exactly what makes the electrical picture complicated. A kitchen done in the nineties, a bathroom done in the two-thousands and an original hallway still running rubber-insulated cable is a very common combination here, and the board in the hall cupboard is usually doing its best to hold all three eras together.
What we are called for most is the job that finally resolves it: a full or partial rewire with a new switchboard, done properly and once. Rewireable ceramic fuses replaced with RCBOs so a fault trips one circuit instead of the house. Lighting circuits earthed. Circuits actually labelled. On a home where previous work was done piecemeal, the value is as much in the coherence as in the new cable.
Renovation drives the rest. Malvern extends and reconfigures constantly, and the electrical side is easiest to get right when it is planned with the build rather than after it. Period detail also matters here in a way it does not everywhere — where a downlight can go in a decorative ceiling, how a pendant sits under a rose, whether a switch plate suits the room. We are happy to work to that standard, and it is worth discussing before the ceilings are closed up.
We are based in Newport, which is about around thirty minutes from Malvern depending on the freeway and the time of day. We are straight with people about that. For planned work — a rewire, a switchboard, a renovation fit-out, lighting, an EV charger — the drive makes no practical difference to you, and we come out for jobs of any size. What we will not do is promise to be at your door in twenty minutes at midnight, because we cannot, and we would rather say so now than have you waiting.
Malvern and Malvern East are a comfortable run for us via the freeway and we work there regularly. Parts of the suburb carry heritage protection, which mostly governs what is visible from the street — solar placement, external conduit and meter box presentation — and is easily planned around when it is considered early.
The other thing worth knowing is that we quote one number after looking at the board and the supply, not a cheap figure over the phone followed by a variation once the wall is open. On older homes especially, what is behind the plaster changes the job — and we would rather find that out before you have committed than after. Ring 0418 583 097 and we will give you a realistic answer about timing and cost.
Malvern, Malvern East, Armadale and Glen Iris. We also work through Camberwell, Hawthorn, Glen Waverley. Our home patch is the inner west — Newport, Williamstown and Yarraville. All Melbourne services →
Yes. We are based in Newport, roughly thirty minutes away via the freeway, and we work across Malvern and Malvern East regularly on planned jobs of any size. Fast emergency response this far east is not something we promise.
Usually yes, eventually — and it is worth knowing which half is which. We can trace what has been done, identify what is still original, and quote a partial rewire covering only what genuinely needs it. Mixed-era wiring is normal in Malvern and it is entirely manageable once someone has mapped it.
They do not have to. Ornate ceilings, roses and cornices need the layout planned rather than a standard grid punched through them. We work out placement with you first — and in some rooms the better answer is pendants and wall lights rather than downlights at all.
Replacing the old fuse board with a modern enclosure, RCBOs on each circuit, proper labelling and, where present, safe removal of an asbestos-based backing board. It typically takes most of a day with a planned power outage, and it is the single biggest safety improvement available to an older home.
Yes. We stage the work so you keep power to the rooms you are using and we coordinate any full outages with you in advance. It takes a little longer than an empty house but it saves you moving out.
Yes, and the earlier the better. Being involved at design stage means the switchboard, mains and circuit layout are planned into the job rather than retrofitted at the end, which is invariably cheaper and tidier.
Tell us about your Malvern project and we'll get back to you quickly with a clear, no-obligation quote.