The Laverton picture
The electrical work we do in Laverton is shaped by what the suburb is built from. Laverton is postwar housing alongside a large and still-growing industrial and logistics estate running north toward the freeway, and an installation put in for that housing is rarely what the same house is asked to carry now.
The dominant driver of this work in Laverton is logistics and warehouse fitout — racking, lighting, chargers for materials handling equipment, and the three-phase supply all of it needs.
What turns up in Laverton
Across Laverton the pattern is consistent: original postwar domestic boards on the residential streets, and in the estates, distribution built for a previous occupier's plant.
None of that is unusual, and none of it is a reason for alarm on its own. It does mean an assessment is worth more than a phone estimate, because what matters is the combination of what is there and what you are about to ask of it.
What the work involves
Going from single-phase to three-phase is not a switchboard job with a bigger board on the end of it. The distributor has to provide the additional phases at the point of attachment, the consumer mains have to be replaced with cable rated for the new supply, the main earth and the earthing system have to be brought up to current requirements, and the switchboard has to be rebuilt around a three-phase main switch with the existing circuits balanced sensibly across the phases. Where the meter box also has to move — because the existing position will not take a larger enclosure, or the run is too long — that becomes part of the same job rather than a separate one.
What usually brings it forward
In Laverton the common triggers are:
- a ducted air conditioning system the existing supply cannot carry
- an EV charger — or a second one — on a house already close to its limit
- an induction cooktop replacing gas, often alongside a full kitchen renovation
- a workshop, pool, lift or pottery kiln with a genuine three-phase load
- a second storey or large extension that roughly doubles the connected load
Any one of them on its own is enough. More often it is two or three arriving together, which is why the job is usually bigger than the thing that prompted the call.
The part specific to Laverton
The newer estates have capacity; the older sheds along the rail line generally do not, and that difference decides whether a fitout is simple or a supply upgrade.
What to expect on the day
Expect the supply to be off for a substantial part of the day, and expect the distributor to be involved — the additional phases are their work, not ours, and their attendance has to be booked rather than assumed. We tell you honestly which parts of the timeline we control and which we do not. Where the existing board can be re-used as a sub-board it will be, and where it cannot we say so before the job rather than after it.
Why it is worth doing properly
The reason to do it properly is that a supply upgrade done halfway just relocates the bottleneck. Putting a larger board on undersized mains, or adding phases without rebalancing the circuits, produces an installation that looks upgraded and behaves exactly as it did before. We assess the whole path from the point of attachment in.
Nearby
We cover the west generally, and the same work in the suburbs either side of Laverton: Altona, Altona North, Point Cook. If your property is close to a boundary it makes no difference to us — it is the same van and the same day rate.
What it costs
Three-phase work is priced per project after a site inspection, because the cost is driven by the run length from the point of attachment, whether the distributor has to attend, and what the existing switchboard can be re-used for.
Quotes are free, fixed-price and given after a site inspection. What is quoted is what is paid, and a Certificate of Electrical Safety is issued on completion.
Whether three-phase is actually the right answer is worth establishing before anything is quoted — sometimes a single-phase supply upgrade and a rebuilt board does the same job for considerably less.
Litmec Electrical is a licensed Victorian electrical contractor (REC-10383, Energy Safe Victoria) based in Newport and trading since 2007. Call 0418 583 097 to talk through a Laverton property.
Free Quote in Laverton
No obligation. We'll come out, look at it properly, and give you a straight answer.
Request a Quote →Common questions
How do I know if I actually need three-phase in Laverton?
You need it when the connected load genuinely exceeds what a single-phase supply can carry, or when a specific appliance requires it. Plenty of properties that ask for three-phase are better served by a single-phase supply upgrade and a rebuilt board, which costs considerably less. We tell you which applies before quoting.
Does the electricity distributor have to be involved?
Yes. The additional phases are provided by the distributor at the point of attachment, and their attendance has to be booked. That part of the timeline is outside our control and we are upfront about it.
How long is the power off for a Laverton three-phase upgrade?
Expect a substantial part of a day. The exact outage depends on whether the mains and meter box are being replaced at the same time, which on most older properties they are.
Do you work in Laverton?
Yes. Laverton VIC 3028 is inside our regular service area — we are based in Newport and cover Greater Melbourne and travel out to roughly 100 km from Newport for project work. There is no travel surcharge for Laverton.
Are you licensed?
Yes. Litmec Electrical is a Registered Electrical Contractor (REC-10383, Energy Safe Victoria), trading since 2007. A Certificate of Electrical Safety is issued on every completed job.
Is the quote fixed?
Yes. Quotes are free, given after a site inspection, and fixed — what is quoted is what is paid. Variations only happen if you change the scope.