Three-Phase Power Upgrades in Moonee Ponds

Why this comes up in Moonee Ponds

Moonee Ponds is Edwardian and interwar housing on good-sized blocks, with the Puckle Street retail strip and a growing amount of medium-density development around the station. That housing stock is the starting point for almost every decision on a job here, because it sets what the original installation was sized for and how much has been added to it since.

The dominant driver of this work in Moonee Ponds is two streams — period houses being renovated, and retail and hospitality tenancies on and around Puckle Street being refitted between leases.

What we find in Moonee Ponds

Across Moonee Ponds the pattern is consistent: house boards from the 1970s and 1980s with asbestos panels, and shop boards on Puckle Street that have been progressively modified by successive tenants.

None of that is unusual, and none of it is a reason for alarm on its own. It does mean an assessment is worth more than a phone estimate, because what matters is the combination of what is there and what you are about to ask of it.

What the work involves

Going from single-phase to three-phase is not a switchboard job with a bigger board on the end of it. The distributor has to provide the additional phases at the point of attachment, the consumer mains have to be replaced with cable rated for the new supply, the main earth and the earthing system have to be brought up to current requirements, and the switchboard has to be rebuilt around a three-phase main switch with the existing circuits balanced sensibly across the phases. Where the meter box also has to move — because the existing position will not take a larger enclosure, or the run is too long — that becomes part of the same job rather than a separate one.

What usually brings it forward

In Moonee Ponds the common triggers are:

• a ducted air conditioning system the existing supply cannot carry
• an EV charger — or a second one — on a house already close to its limit
• an induction cooktop replacing gas, often alongside a full kitchen renovation
• a workshop, pool, lift or pottery kiln with a genuine three-phase load
• a second storey or large extension that roughly doubles the connected load

Any one of them on its own is enough. More often it is two or three arriving together, which is why the job is usually bigger than the thing that prompted the call.

The Moonee Ponds complication

Shop fitouts here run to a fixed handover date, so the electrical has to be programmed against the builder's dates rather than fitted in around them.

What to expect on the day

Expect the supply to be off for a substantial part of the day, and expect the distributor to be involved — the additional phases are their work, not ours, and their attendance has to be booked rather than assumed. We tell you honestly which parts of the timeline we control and which we do not. Where the existing board can be re-used as a sub-board it will be, and where it cannot we say so before the job rather than after it.

Why it is worth doing properly

The reason to do it properly is that a supply upgrade done halfway just relocates the bottleneck. Putting a larger board on undersized mains, or adding phases without rebalancing the circuits, produces an installation that looks upgraded and behaves exactly as it did before. We assess the whole path from the point of attachment in.

Nearby

We cover the inner north-west generally, and the same work in the suburbs either side of Moonee Ponds: Essendon, Ascot Vale. If your property is close to a boundary it makes no difference to us — it is the same van and the same day rate.

What it costs

Three-phase work is priced per project after a site inspection, because the cost is driven by the run length from the point of attachment, whether the distributor has to attend, and what the existing switchboard can be re-used for.

Quotes are free, fixed-price and given after a site inspection. What is quoted is what is paid, and a Certificate of Electrical Safety is issued on completion.

Whether three-phase is actually the right answer is worth establishing before anything is quoted — sometimes a single-phase supply upgrade and a rebuilt board does the same job for considerably less.

Litmec Electrical is a licensed Victorian electrical contractor (REC-10383, Energy Safe Victoria) based in Newport and trading since 2007. Call 0418 583 097 to talk through a Moonee Ponds property.