The Point Cook picture
The electrical work we do in Point Cook is shaped by what the suburb is built from. Point Cook is estate housing built from the late 1990s onwards, almost all of it on single-phase supply, with newer stages continuing to be released, and an installation put in for that housing is rarely what the same house is asked to carry now.
The dominant driver of this work in Point Cook is capacity rather than age. Ducted systems, solar and batteries, EV charging and converted garages all land on boards with nothing left in them.
What turns up in Point Cook
Across Point Cook the pattern is consistent: modern boards, but frequently specified to the minimum for the house as built, with no spare ways for anything added later.
None of that is unusual, and none of it is a reason for alarm on its own. It does mean an assessment is worth more than a phone estimate, because what matters is the combination of what is there and what you are about to ask of it.
What the work involves
The old board comes out and a modern enclosure goes in, with a circuit breaker and an RCD protecting every circuit and every one of them labelled so the next person can read it. In older properties the consumer mains and the main earth often have to be replaced at the same time, because the incoming cable was sized for a house with a stove, a fridge and a few lights. If the backing panel is asbestos it has to be removed and disposed of properly, which is a licensed job in its own right. Most domestic upgrades are a single day on site.
The part specific to Point Cook
Rewiring is rarely the answer in Point Cook — the wiring is young. What is usually needed is more capacity: extra ways, a larger board, or three-phase.
What to expect on the day
Most domestic upgrades are a single day on site, with the power off for a good part of it. We agree a day that suits you and tell you what time we expect to be back on — including if the distributor has to attend to pull the service fuse, which is outside our control and worth knowing about in advance.
Why it is worth doing properly
The reason it is worth doing once, properly, is that a board is the thing everything else depends on. Solar, batteries, EV charging, air conditioning and any future circuit all land on it, and a board with no spare ways stops every one of them.
Nearby
We cover the west generally, and the same work in the suburbs either side of Point Cook: Altona, Williamstown. If your property is close to a boundary it makes no difference to us — it is the same van and the same day rate.
What it costs
Every job is quoted per project after a site inspection rather than off a list. How we quote sets out what the quote covers and what moves it. Quotes are free, fixed-price and confirmed on site.
If the board is full, has no safety switches, or still has ceramic fuses, it is worth having assessed rather than added to again.
Litmec Electrical is a licensed Victorian electrical contractor (REC-10383, Energy Safe Victoria) based in Newport and trading since 2007. Call 0418 583 097 to talk through a Point Cook property.
Free Quote in Point Cook
No obligation. We'll come out, look at it properly, and give you a straight answer.
Request a Quote →Common questions
What does a switchboard upgrade in Point Cook depend on?
The number of circuits, whether the mains and the meter position also have to change, and whether there is asbestos backing behind the switchgear. We quote it per project after looking at the board, and the quote is fixed.
How long does it take?
Most domestic upgrades are a single day, with the power off for a good part of it. We agree a day that suits you and tell you when we expect to be back on.
Will the mains need replacing too?
Often, on older properties. The incoming cable was sized for a house with a stove, a fridge and a few lights, and upgrading the board without checking the mains just moves the bottleneck.
Do you work in Point Cook?
Yes. Point Cook VIC 3030 is inside our regular service area — we are based in Newport and cover Greater Melbourne and travel out to roughly 100 km from Newport for project work. There is no travel surcharge for Point Cook.
Are you licensed?
Yes. Litmec Electrical is a Registered Electrical Contractor (REC-10383, Energy Safe Victoria), trading since 2007. A Certificate of Electrical Safety is issued on every completed job.
Is the quote fixed?
Yes. Quotes are free, given after a site inspection, and fixed — what is quoted is what is paid. Variations only happen if you change the scope.